ocom TR323 compact IoT router now available at OKSA Automation Limited.

The Bivocom TR323 is a compact industrial 5G NR IoT router specifically designed for IoT, M2M, and eMBB applications that requires higher speed and lower latency data transmission. This IoT router provides OpenWRT based Linux OS embedded environment that allows IoT developers and engineers to program and install their own applications based on Python, C/C++ to the hardware.

The Cermate PK2 series IoT HMI comes in a range of 4.3”-15” touchscreen displays. Equipped with an ARM9 32-bit RISC processor, these IoT HMI support over 500 mainstream protocols to quickly integrate with various equipment and SCADA system.

Established since 2003 and located in Taiwan, Cermate Technologies Inc has been manufacturing innovative products to help users develop safer and more advanced HMI solutions, with greater efficiency and ease to maintain industry 4.0 standards.

The I-3591 is a M-Bus repeater developed by ICP DAS to strengthen the driving ability of M-Bus, extend the communication distance of M-Bus and reshape the signal waveform, and also provides the M-Bus master with better communication capabilities.

The ICP DAS tSG-3781B/L is a compact single-channel DC current input signal conditioning module that converts 4~20mA current input to PWM output. The PWM output has a duty cycle of 0%~100% and performs a linear conversion of the 4~20mA current input. The PWM output frequency is adjustable from 600Hz to 800Hz via push buttons.

The AXP-9000-IoT series are Windows 10 IoT- based PACs that combines computing, I/O, and operator interface into a single module. These smart automation controllers provide the perfect solution for integrating HMI, data acquisition, and control into a single compact box.

The PET-AR400 is a high speed data acquisition device with a built-in Ethernet communication port for data transfer over a network, and includes four high-speed 24-bit differential IEPE input channels (128 kHz sample-and-hold @ one channels).

The ICP DAS tGW-700 series of Modbus TCP to Modbus RTU  converter or Modbus ASCII gateway allows Modbus TCP host to communicate with Modbus RTU/ASCII serial devices over Ethernet network; eliminating the cable length limitations of traditional serial communication equipment.

The FEMA I4P signal converter is multifunction device that can be easily configured to read 4/20 mA and 0/10 Vdc process signals, potentiometers, resistances, and a wide range of temperature sensors,

The ICP DAS iWSN-9603 series of intelligent wireless 3-phase AC smart power meters are specifically designed for power consumption measurement and monitoring in remote locations where cabling is challenging and expensive.